A Guide to Spa Water Care and Maintenance

Spa Water Care

680 Views

Clean and safe water is essential for your hot tub. You must regularly perform spa water care and maintenance practices. Such regular exercises improve your spa efficiency but can be time-consuming. Fortunately, you can apply easy natural water care and maintenance practices for better results.

Here’s a guide to spar water care and maintenance.

1. Replace spa filter

Replacing your spa filter is an effective natural pool and spa water treatment practice for your spa. But your filter replacement period can vary depending on your usage and other natural conditions. At some point, your filter wears out, making its cleaning ability drop. And when that happens, you must replace the spa filter to uphold active filtration.

2. Clean your spa filter

Irrespective of the spa filter position, cleaning it is a primary spa water care and maintenance task. Turn the filter body counterclockwise to access the filter and avoid water spillage. However, your filter cleaning intervals might vary depending on the spa size. Take precautions and regulate water pressure while cleaning to prevent spa breakages.

3. Cleaning the spa

After 3-4 months, drain your spa for an easy, complete spa cleaning. Thoroughly clean all the surfaces, spa waterline, and plumbing. But avoid spa cleaning mistakes such as using a household cleaning product instead, and use the natural pool and spa water treatment practices for effective spa cleaning.

The natural method effectively removes all contaminants and has no side effects. Use a specific spa vacuum cleaner for accumulated dirt that settles at the surface of your spa.

4. Spa water levels

If your water level drops below the skimmer intake point, the skimmer starts sucking air instead of water. The condition can damage your spa pump system. To avoid the problem, fill your spa with water slightly above the skimmer intake and be cautious to prevent an overflow while refilling the spa.

5. Spa cover

Removing the spa cover is an essential water care and maintenance practice that increases your spa longevity. The technique is an effective natural water care and maintenance approach.

Remove the spa cover weekly to let it take in air and cool down from the spa heat and vapor. Use the time to shock your spa if necessary. Further, clean any dirt components in your spa cover and condition it.

6. Balance your water chemistry

Conduct regular tests if you’re keen on keeping your spa water chemistry balanced. You can achieve the balance naturally by using tap water to fill your spa. Adjust the chemistry levels from the tests to match the below ideal levels.

  • Chlorine: 1.0-3.0ppm
  • Bromine: 2.0-4.0ppm
  • PH: 7.4-7.6
  • Total alkalinity: 80-100
  • Calcium hardness 150-250ppm

7. Effective water circulation

Keeping your spa circulation system is a practical natural approach to dealing with bacteria and other contaminants. Therefore, ensure your spa filtration system is up and running effectively for easy water flow. Remember, regularly running your circulation system provides cleaner spa water.

Final thoughts

When it comes to spa water care and maintenance, cleanness is critical. Your spa safety and cleanness depend on regular maintenance practices. Fortunately, you have no reason to worry about chemical side effects; natural spa care and maintenance methods work perfectly!

Be the first to comment

Leave a Reply